China Pot Bearing, Pot Rubber Bearing deep groove ball bearing

Solution Description

Item Description

This bearings does not allow any horizontal motion,but is capable of absorbing rotational movement about any horizontal axis by utilization of the elastomer pad.

It consists of a steel piston supported by a disc of unreinforced elastomer confined within a metallic cylinder which offers the load carrying medium.

These compact, lower peak bearings are excellent for vertical loads upto any capacity. Suited for curved and straight concrete an metal bridges in seismic locations.
We manufacture numerous kinds of pot bearings – including set pot bearings, sliding guided pot bearings and free sliding pot bearing

The fundamental aspects of a Pot Bearing is made up of a shallow cylinder, acknowledged as pot, an elastomeric pad identified as disc,a solitary or set of sealing rings, piston and sliding surfaces. Masonry plates and base plates are widespread for the installation of pot bearings, as they allow attachment of the bearings and enhance the assistance spot on the pier and abutment. Pot bearings are fixed in opposition to all translation unless of course they are utilised with a PTFE sliding surface.

Rewards of Pot bearings:
Pot bearings are normally recommended when bearing rotations are large, compact types and extended time period servesability are needed.

Pot bearings offers lengthier provider daily life compared to elastomeric bearings.
More compact in measurement compared to elastomeric bearings.
Longer routine maintenance time.

Pot bearings can maintain many cycles of extremely tiny and big rotations.
Cost-effective fix as alternative of elastomer disc only.
Does not get effected by external atmospheric correction.

Additional fixtures for Pot Bearings:
We also supply added fixtures for set up of pot bearings like momentary bearings, PTFE sliding bearings, studs, base plates, masonry plates with welded studs and many others and will be pleased to acquire your complete needs.

Comprehensive Photos

Company Profile

Haigger, founded in early 2000, is specialized in producing bridge bearing, bridge growth joint, building expansion joint, and construction bearing. Our firm has a registered money of 8, 800, 000 us dollars, it handles an spot of fifty, 000 square meters, with a building area of twenty, 000 square meters, there are two hundred staff now in our firm.
Haider is a modern enterprise which has a foremost technologies in China, and the sophisticated creation products, perfect screening tools.
It has handed the ISO9001: 2008 worldwide high quality program certification and ISO14001: 2004 environmental administration technique certification.
We have a strong complex drive and a professional installation staff, best right after-sales support in our firm. More than several several years, our items have been extensively used in freeway, railway bridges, community buildings, and so on. We have also efficiently get take part in many national key assignments and numerous landmark project. Such as: Xihu (West Lake) Dis. global airport, ZheJiang cash global airport and HangZhou global airport, HangZhou global airport, HangZhou international airport ZheJiang maglev, ZheJiang light rail, mild rail ZheJiang , HangZhou metro ZheJiang CZPT hub, and HangZhou 6 broad river bridge, ZheJiang HangZhou xiangjiang river bridge, HangZhou tianxingzhou yangtze river bridge, zHangZhoug HangZhouajian bridge.

Shipping&Shipping

1.Basic safety deal, 3 actions of packages,pearl cotton,carton and plywood for the transportation
2.100% take a look at just before providing (make certain the good quality)
three.Product shipped in about fifteen doing work days towards payment relies upon on the quantity 
four.Tracking variety will be sent to you as quickly as we ship the product 
 

Our Support

FAQ

FAQ(Frequently Asked Questions)
one. You are a trading company or manufacturer?
  -We are manufacturer, and have our own factory.
two. What certificate do you get?
  – ISO9001-2008.
three. What is your MOQ?
  -100m.
four. What is your delivery time when making mass production?
  -About 15 days, the actual time depends on your order quantity.
five. Can you do OEM?
  -Yes, we can. OEM is welcomed.
six. What is your sample policy?
  -We offer free samples, and the buyer takes responsibility of the express charge.
7. How long will it take to prepare samples?  
 -About 3-4 operating times.


/ Piece
|
2 Pieces

(Min. Order)

###

Material: Steel
Application: Transportation
Technics: Casting
Movement: 50-500mm
Vertical Load: 0.5-60mn
Certification: CE, ISO

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

FAQ(Frequently Asked Questions)
1. You are a trading company or manufacturer?
  -We are manufacturer, and have our own factory.
2. What certificate do you get?
  – ISO9001-2008.
3. What is your MOQ?
  -100m.
4. What is your delivery time when making mass production?
  -About 15 days, the actual time depends on your order quantity.
5. Can you do OEM?
  -Yes, we can. OEM is welcomed.
6. What is your sample policy?
  -We offer free samples, and the buyer takes responsibility of the express charge.
7. How long will it take to prepare samples?  
 -About 3-4 working days.

/ Piece
|
2 Pieces

(Min. Order)

###

Material: Steel
Application: Transportation
Technics: Casting
Movement: 50-500mm
Vertical Load: 0.5-60mn
Certification: CE, ISO

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

FAQ(Frequently Asked Questions)
1. You are a trading company or manufacturer?
  -We are manufacturer, and have our own factory.
2. What certificate do you get?
  – ISO9001-2008.
3. What is your MOQ?
  -100m.
4. What is your delivery time when making mass production?
  -About 15 days, the actual time depends on your order quantity.
5. Can you do OEM?
  -Yes, we can. OEM is welcomed.
6. What is your sample policy?
  -We offer free samples, and the buyer takes responsibility of the express charge.
7. How long will it take to prepare samples?  
 -About 3-4 working days.

Choosing the Right Ball Bearing for Your Application

When choosing a Ball Bearing, there are several things to consider. These factors include: the size, lubricant type, presence of corrosive agents, stray electrical currents, and more. It can be challenging to choose the right type, size, and type of ball bearing for your application. You should also carefully calculate the loads to determine the right size. Here are some tips for choosing the right Ball Bearing for your application.

Single-row

The single-row ball bearing is one of the most popular types of bearings. The inner and outer ring are designed with raceway grooves that are shaped slightly larger than the balls. This type of bearing has a low torque and can handle high-speed applications with minimal power loss. The radial dimensions of single-row ball bearings also vary, so it is possible to find one that fits your specific application. Besides the above-mentioned advantages, single-row ball bearings are also available with varying grease levels and are widely applicable to applications where the space is limited.
Single-row ball bearings are also called angular-contact ball bearings. Because of their single-row design, they are not separable and can accommodate a high-speed, heavy-duty application. Single-row angular-contact ball bearings can only handle axial load in one direction, and they must be installed in pairs for pure radial loads. Single-row ball bearings are a popular type of rolling bearings and can be used for a wide range of applications.
bearing

Self-aligning

The self-aligning ball bearing was invented by Sven Wingquist, a plant engineer for a textile company in Sweden. While he was responsible for making production as efficient as possible, he soon realized that the machinery he had in place wasn’t working as efficiently as it could. Although ball bearings are great for reducing friction, they were not flexible enough to compensate for misalignments in the machine.
Self-aligning ball bearings have two rows of balls and a common sphered raceway. The inner ring is curved and combines the two rows of balls into one cage. These bearings can tolerate shaft misalignment and compensate for static angular defects. They can be used in simple woodworking machinery, ventilators, and conveying equipment. They are often the preferred choice for applications where shaft alignment is an issue.

Ceramic

A Ceramic ball bearing is a type of high-performance bearing that is available in both full-ceramic and hybrid forms. The main differences between ceramic and steel ball bearings are their construction, lubrication, and mobility. High-quality ceramic ball bearings are durable, and they are ideal for corrosive and high-temperature applications. The material used to create these bearings helps prevent electrolytic corrosion. They are also ideal for reducing the friction and lubrication requirements.
Ceramic balls are harder and less brittle than steel balls, which gives them a higher degree of rigidity. Ceramics also have a higher hardness, with a hardness of Rc75-80 compared to Rc58-64 for steel balls. Their high compressive strength is approximately 5 to 7 times greater than steel. In addition, they have a very low coefficient of friction, which allows them to spin at higher speeds and with less friction. This increases their lifespan and durability, and decreases the energy needed to turn cranks.

Steel

Unlike traditional bearings, steel balls have a relatively uniform hardness. Carbon steel, for instance, is 2.1% carbon by weight. According to the American Iron and Steel Institute, copper content must be no more than 0.40% and manganese content should not be more than 1.65 g/cm3. After carbonizing, steel balls undergo a process called sizing, which improves their roundness geometry and hardness.
The main differences between steel ball bearings and ceramic ball bearings can be traced to their different materials. Ceramic balls are made from zirconium dioxide or silicon nitride. Silicon nitride is harder than steel and resists shocks. The result is increased speed and longer service life. Polyoxymethylene acetal (PMMA) bearing balls are known for their stiffness, strength, and tolerance, but are not as common as steel ball bearings.

Plastic

The most popular types of plastic ball bearings are made of polypropylene or PTFE. These bearings are used in applications requiring higher chemical resistance. Polypropylene is a structural polymer that offers excellent physical and chemical properties, including excellent resistance to organic solvents and degreasing agents. Its lightweight, low moisture absorption rate, and good heat resistance make it an excellent choice for high-temperature applications. However, plastic bearings are not without their drawbacks, especially when operating at very high temperatures or under heavy loads.
Compared to metal bearings, plastic ball-bearings do not require lubrication. They also are highly corrosion-resistant, making them an excellent choice for wash-down applications. They are also post-, autoclave-, and gamma sterilizable. Many conventional steel ball-bearings cannot handle the high temperatures of food processing or swimming pools. In addition to high temperature applications, plastic ball bearings are resistant to chemicals, including chlorine.
bearing

Glass

Plastic sliding bearings are molded bearings made of engineering plastic. With self-lubricating modification technology, these bearings can be produced by injection molding of plastic beads. They are widely used in various industries such as office equipment, fitness and automotive equipment. In addition to plastic bearings, glass balls are used in a variety of other applications, including medical equipment. Glass ball bearings have excellent corrosion resistance, excellent mechanical properties, and are electrically insulators.
Plastic ball bearings are made of all-plastic races and cages. These bearings are suitable for applications that are exposed to acids and alkalis. Because they are cheaper than glass balls, plastic ball bearings are popular in chemical-exposed environments. Stainless steel balls are also resistant to heat and corrosion. But the main disadvantage of plastic ball bearings is that they are not as strong as glass balls. So, if weight and noise is your main concern, consider using plastic balls instead.

Miniature

The global miniature ball bearing market is expected to reach US$ 2.39 Billion by 2027, at a CAGR of 7.2%. Growth in the region is attributed to technological advancement and government initiatives. Countries such as India and China are attracting FDIs and emphasizing the establishment of a global manufacturing hub. This is boosting the market for miniature ball bearings. The miniscule ball bearings are manufactured in small quantities and are very small.
Some manufacturers produce miniature ball bearings in different materials and designs. Chrome steel is the most popular material for miniature ball bearings because of its high load capacity, low noise properties, and lower cost. But the cost of stainless steel miniature bearings is low, since the amount of steel used is minimal. Stainless steel miniature bearings are the smallest in size. Therefore, you can choose stainless steel mini ball bearings for high-speed applications.

Angular-contact

Angular-contact ball bearings have three components: a cage, inner ring, and balls. Angular-contact ball bearings can support high axial and radial loads. Various design and manufacturing attributes make angular-contact ball bearings suitable for a variety of applications. Some features of this bearing type include a special lubricant, different cage materials, and different coatings.
The size of an angular-contact ball bearing is determined by the design units: outer ring width, axial load, and radial load. Depending on the type of application, an angular-contact ball bearing may be manufactured in double-row, triple-row, or quadruple-row configurations. Angular contact ball bearings can be classified according to their design units, which range from metric to imperial. A higher ABEC number means tighter tolerances. To determine the tolerance equivalent of a particular bearing, consult a standard Angular-contact ball bearing table.
Angular-contact ball bearings feature high and low-shoulder configurations. They have two-dimensional races that accommodate axial and radial loads. They are available in self-retaining units with solid inner and outer rings, and ball and cage assemblies. Cages made of cast and wrought brass are the most popular, but lightweight phenolic cages are also available. The latter is a better choice because it doesn’t absorb oil and has lower rolling friction.
bearing

Materials

When it comes to the construction of a ball bearing, high-quality raw materials are a crucial component. These materials not only affect the overall quality of a ball bearing, but also influence the cost. That’s why you should pay close attention to raw material quality. In addition to that, raw materials should be tested several times before the manufacturing process to ensure quality. Read on for some information about the different types of materials used to make ball bearings.
Steel is the most common material for ball bearings. Most ball bearings contain stainless steel balls, which are remarkably corrosion-resistant. They are also resistant to saltwater and alkalis. However, stainless steel balls are heavier than plastic ones, and they are also magnetic, which may be a drawback in some applications. If you’re looking for a metal-free option, glass balls are the way to go. They’re sturdy, lightweight, and resistant to a wide range of chemicals.

China Pot Bearing, Pot Rubber Bearing     deep groove ball bearingChina Pot Bearing, Pot Rubber Bearing     deep groove ball bearing
editor by CX 2023-04-03