Japan
カムフォロア / ローラフォロア
Machine tools, factory automation, robotics and electronics equipment often use compact metric followers. CF-series references are familiar search terms, so a Japanese RFQ may begin with CF5, CF6, CF8 or CF12 rather than a KR code.
What Buyers Usually Need to Match
| RFQ item | What to provide |
|---|---|
| Existing model/reference | KR, KRV, CF, legacy code or a clear photo of the marking. |
| Measured interface | Roller outside diameter, roller width, stud diameter and thread pitch. |
| Machine context | Track/cam function, load direction, speed or cycle rate and available support. |
| Execution details | Running-surface profile, sealing/lubrication, eccentric adjustment and any special material requirement. |
| Documentation | Drawing, inspection or material-document requirements when applicable. |
Size References for Japan
EP-KR13 to EP-KR40 are common size points to compare for compact and medium mechanisms.
Open the exact model row when a Japanese RFQ starts from CF5, CF6, CF8 or CF12; checking the thread beside the reference keeps the comparison tied to the machine.
EP-KR13 Cam Follower Bearing | CF5 Cross Reference | Stud Type
EP-KR13 stud type cam follower bearing with 13 mm outside diameter, M5 x 0.8 metric stud thread and CF5 cross-reference designation.
View specificationsEP-KR16 Cam Follower Bearing | CF6 Cross Reference | Needle Roller
EP-KR16 stud type cam follower bearing with 16 mm outside diameter, M6 x 1 metric stud thread and CF6 cross-reference designation.
View specificationsEP-KR19 Stud Type Cam Follower | CF8 Cross Reference
EP-KR19 stud type cam follower bearing with 19 mm outside diameter, M8 x 1.25 metric stud thread and CF8 cross-reference designation.
View specificationsEP-KR22 Cam Follower Bearing | CF10 Metric Stud Type
EP-KR22 stud type cam follower bearing with 22 mm outside diameter, M10 x 1.25 metric stud thread and CF10 cross-reference designation.
View specificationsQuotation Preparation
Provide the existing CF/KR reference, stud thread, roller diameter and drawing. If the machine has cleanliness or grease restrictions, state them explicitly.
For Japan enquiries, EVER POWER reviews the technical and commercial details sent with the RFQ. This page does not represent a Japanese office, warehouse or stock location.
Request a Japan quotation review
Send the model, quantity, mating-track details and application notes for a quotation review.